Problem with ending of a mission

[Boli]

Hi all!

I started to play the southern campaign Yesterday. Today I played the second mission. Everything got fine. Only the mission doesn`t end after I conquered the northern Camp. The whole map is without enemy. Whats wrong with that? I must say one thing. Before I raided the Village in the middle I was pushing into the north and cleared the area there even without order. After that I cleared the Village and the eastern russian frontline. So all targets are finish only the last doesn`t want to react.

Greets Boli

[Adrian Taylor]

See the topic on Cherkasskoe. If the last Russian defenders were all killed in their trenches the objectivs and thus the mission will not complete. There is a patch that will be released shortly to rectify this issue. If possible go back to a save game and make sure the Russian defenders retreat from the trenches. Alternatively use the Win(0) cheat command.

Press the "¬" key to bring the text consule down and enter the following:

@password("Panzerklein")
@win(0)

This will finish the mission.


Adrian Taylor

[Boli]

Hi!

Thanks for your answer. I must say two things. First I got back some saves and began the mission again before I destroyed the Enemy in the north and so I first conquered the eastern russian frontline from north west to the east so I rolled the enemy up from the left flank trench by trench. After that I conquered the rest of the village and the north was the last enemy position. This time there came no tank attack from the east (Land Lease tanks). After I killed all enemys the target wasn`t fullfilled. Can it be that the one supply point in the north shown as an enemy is the problem that the mission can not be won. Because normally when you drive close to an supply point its changing from enemy to own. This one didn´t.
And then I had the same problem like before. The mission didn´t end. And one problem more that you couldn´t know was that the cheats didn´t function.
I first guess that it has to do with any installed mods that they disturbed something. So I reinstalled the whole thing (Rolling Thunder and Mission Kursk) and tried the Cheats at any Originalmission and it was going good. Then I changed the ailogic.dll from the Stalingradgame with the original ailogic.dll and tried the cheats again. And that was it. The cheats are neutralized when I use the Stalingradfolder. So to anybody who is wondering when the cheats don´t work. This can be a reason.
Anyway! Thanks for your help.

Greets from Germany

Boli

[Boli]

P.s.
And of course I could go on with the @win( 0 ) cheat and I am in the middle of the third mission now. ;D

Boli

[BKPortal]

Boli said:

Then I changed the ailogic.dll from the Stalingradgame with the original ailogic.dll and tried the cheats again. And that was it. The cheats are neutralized when I use the Stalingradfolder. So to anybody who is wondering when the cheats don´t work. This can be a reason.

Hello Boli,

If you use the Stalingrad ailogic.dll file then you need to use the Stalingrad cheat access code:

@password( "www.dtf.ru" )

After that you can use the standard Blitzkrieg cheat codes

[polo]

Dear Sirs,
I'm playing Butovo and I have control of the whole map. I got a message to emplace the western battery which I promptly did. However the game will not end. I tried using the cheat code win(0) but that doesn't work either. The game is installed with Burning horizon. Please advise

[BBFred]

Hi Polo,

Could you tell us if the eastern battery objective is completed? Do you have the 1.3 patch installed too?

If the mission doesn't end at this point it could mean that your western battery isn't deployed inside the circle loosely drawn by little ravines around the wheat field under the objective arrow, or that a sniper or 2 are left alive around the position, or that the Russian forward observer team is still alive and observing the position.

Make sure the guns are properly placed, and comb the sector for remaining hidden Russian and the mission should end.

[polo]

Hello,
I've installed the patch,but it still says that its version 1.2. I've also throughly combed the area and couldn't find anybody. the guns are also set up next to each other on the hill. Great game,but has me perplexed.
Polo

[BBFred]

The patch won't show a new version number so it doesn't mean it's not installed.

As for your current problem, there's a small chance currently that the mission cannot end in the situation you describe, mostly if you had many troops covering the sector by the time you got your artillery to the western position. It may be you're one of the unlucky few here.

That problem is resolved in the coming 1.31 patch, but meanwhile you may have to use the cheat to win the mission:

Open console and type (characters are case sensitive):
@password("Panzerklein") <Enter>
@win(0) <Enter>

If you're using the Stalingrad ailogic.dll file
then it's:

@password("www.dtf.ru") <Enter>
@win(0) <Enter>

[RolfArne]

Hi Adrian,
Got the same problem as the others with the second mission and would like to use the cheat you described.
However I am not able to make the text console appear. The "~" will not work. It does work in a text-document ("AltGr"+the key) but nothing happens in the game. Any tip?

Regards RA

[Adrian Taylor]

Are you sure you are using the correct key it should be this one "¬" (above your "Tab" key. This will bring you down the text consule where you can enter the cheat codes.

[RolfArne]

Ah thank you. (It said the "~" sign in the old Blitzkrieg-manual.) But another silly problem: I can't make the "@" sign appear. I type "Ctrl+Alt+2" and nothing happens... Tried to paste it in but that does not work either.

RA

[Adrian Taylor]

Depends on your keyboard configuration. Mine is set to shift+'.

Adrian

[RolfArne]

Found it at last ("Alt Gr+2") and the cheat worked too... Thanks!